Why Buy Pre-owned? 2008 Buyer's Guide
including info on how to spot counterfeit Cisco
|
|
| |
Cisco 7206VXR/NPE-G1 Router
Cisco 7206VXR/NPE-G1 Chassis ...
|
 |
UC Part #: 214659
Availability: In Stock - Ready to ship
Actual item may differ from photo shown.
UsedCisco.com does not sell or include licensed software of any kind. All products are tested and updated with the latest manufacturer's firmware.
|
|
|
|
|
| This is an A+ Certified Pre-Owned 7206VXR/NPE-G1. The 7200 VXR routers are the multiservice members of the 7200 series routers. The 7200 VXR routers are designed to support gigabit capabilities and to improve data, voice, and video integration in both service provider and enterprise environments. The Cisco 7200 VXR routers incorporate an integrated Multiservice Interchange (MIX) capability to support future voice applications. MIX interconnections on the midplane provide the ability to switch DS-0 time slots between multichannel T1 or E1 interfaces, much like a digital cross-connect or an add-drop multiplexer. This feature enables the Cisco 7200 VXR routers to switch DS-0 voice channels on a T1 or E1 interface from one voice processing port adapter to another voice processing port adapter. It also enables DS-0s to be switched through the Cisco 7200 VXR routers without any processing, a requirement in certain voice configurations.
The Cisco 7200 VXR routers support a high-speed network services engine (NSE) as well as the high-speed network processing engine. The Cisco 7206VXR supports multiprotocol, multimedia routing and bridging with a wide variety of protocols and port adapter combinations available for 7200 series routers. In addition, the Cisco 7206VXR midplane provides increased support for multiple high-bandwidth port adapters. Enjoy great savings and unmatched value when you buy 7206VXR/NPE-G1 from UsedCisco.com. |
|
|
|
|
Product Description
|
Cisco 7206 VXR - router - with Cisco 7200VXR NPE-G1 Network Processing Engine |
|
Device Type
|
Router |
|
Form Factor
|
Rack-mountable - modular - 3U |
|
Dimensions (WxDxH)
|
16.8 in x 17 in x 5.2 in |
|
Processor
|
1 x Broadcom BCM1250 700 MHz |
|
RAM
|
256 MB (installed) / 1 GB (max) - DDR SDRAM |
|
Flash Memory
|
64 MB (installed) / 256 MB (max) |
|
Data Transfer Rate
|
1 Gbps |
|
Routing Protocol
|
OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP |
|
Data Link Protocol
|
Ethernet, Fast Ethernet, Gigabit Ethernet |
|
Network / Transport Protocol
|
TCP/IP, UDP/IP |
|
Remote Management Protocol
|
SNMP, Telnet |
|
Features
|
Cisco IOS IP Plus , modular design, full duplex capability, DHCP support, NAT support, RARP support, ARP support, VLAN support |
|
Compliant Standards
|
IEEE 802.1Q |
|
Power
|
AC 120/230 V AC 100/240 V ( 50/60 Hz ) |
|
Bundled with
|
Cisco 7200VXR NPE-G1 Network Processing Engine |
|
|
|
Device Type
|
Router |
|
Form Factor
|
Rack-mountable - modular - 3U |
|
Installed Modules Qty (Max)
|
1 (installed) / 8 (max) |
|
Width
|
16.8 in |
|
Depth
|
17 in |
|
Height
|
5.2 in |
|
Bundled with
|
Cisco 7200VXR NPE-G1 Network Processing Engine |
|
|
|
Type
|
1 x Broadcom BCM1250 700 MHz |
|
|
|
|
|
RAM
|
256 MB (installed) / 1 GB (max) - DDR SDRAM |
|
Flash Memory
|
64 MB (installed) / 256 MB (max) |
|
|
|
Connectivity Technology
|
Wired |
|
Data Transfer Rate
|
1 Gbps |
|
Data Link Protocol
|
Ethernet, Fast Ethernet, Gigabit Ethernet |
|
Network / Transport Protocol
|
TCP/IP, UDP/IP |
|
Routing Protocol
|
OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP |
|
Remote Management Protocol
|
SNMP, Telnet |
|
Features
|
Modular design, full duplex capability, DHCP support, NAT support, RARP support, ARP support, VLAN support |
|
Compliant Standards
|
IEEE 802.1Q |
|
|
|
Expansion Slots Total (Free)
|
3 ( 3 ) x GBIC |
|
|
8 ( 7 ) x expansion slot |
|
|
2 ( 0 ) x memory |
|
|
1 CompactFlash Card |
|
Interfaces
|
3 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 |
|
|
1 x management - console |
|
|
1 x management - auxiliary |
|
|
|
Authentication Method
|
RADIUS, PAP, CHAP, TACACS |
|
Compliant Standards
|
FCC Class A certified, VCCI Class B ITE, EN 60950, EN55022, IEC950, UL 1950, CSA 22.2 No. 950 |
|
|
|
Power Device
|
Power supply - hot-plug / redundant - plug-in module |
|
Installed Qty / Max Supported Qty
|
1 (installed) / 2 (max) |
|
Voltage Required
|
AC 120/230 V AC 100/240 V ( 50/60 Hz ) |
|
|
|
OS Provided
|
Cisco IOS IP Plus |
|
|
|
Min Operating Temperature
|
32 °F |
|
Max Operating Temperature
|
104 °F |
|
Humidity Range Operating
|
10 - 90% |
Enjoy great savings and unmatched value when you buy a from UsedCisco.com.
Back To Top
There are no reviews yet for this product.
Back To Top
|
|
|
|
|